生态环境损害赔偿诉讼：定义与定位矫正

面对生态环境损害赔偿诉讼这一新型诉讼形式,准确把握其定义和定位至关重要。现有生态环境损害赔偿诉讼按国家自然资源所有权私权化路径进行制度构建,其现行定义为特殊私益诉讼,现行定位为环境行政替代工具。这种定义与定位导致其与环境公益诉讼割裂,运行序位上优先于环境民事公益诉讼,引起国家机关角色错位。生态环境损害赔偿诉讼与环境民事公益诉讼的诉讼标的相同,救济和保护的利益均为环境公益,其定义应回归公益诉讼本位;政府在环境公益保护上有着广泛的职权和手段,是环境公共治理的优先主体,仅在少数行政不能的情形下才有借助司法的必要性和合理性,其在定位上应作为环境行政执法的补充机制在有限范围内发挥作用。据此,生态环境损害赔偿诉讼在制度体系上应与既有环境民事公益诉讼置于同一诉讼系属统筹立法,在诉讼序位上应让位于社会组织提起的环境民事公益诉讼。     

Utilization of MSWI fly ash as partial cement or sand substitute with focus on cementing efficiency and health risk assessment

• Washed MSWI fly ash was used as partial cement or sand substitute. • Sand replacing is beneficial for strength, while cement replacement reduces strength. • Cementing efficiency factor and mortar pore structure explain the strength results. • Health risk assessment was conducted for MSWI fly ash blended cement mortar. • CR and HI contributed by different exposures and heavy metals were analyzed. The strength of cement substituted mortar decreases with the increase in fly ash amount, whereas the strength increases when the fly ash is blended as sand substitute. A mortar with highest strength (compressive strength= 30.2 Mpa; flexural strength= 7.0 Mpa) was obtained when the sand replacement ratio was 0.75%. The k value (cementing efficiency) of fly ash varied between 0.36 and 0.15 for the fly ash fraction in binder between 5% and 25%. The k values of fly ash used for sand replacement were all significantly above that used for cement substitution. The macropores assigned to the gaps between particles decreased when the fly ash was used as sand replacement, providing an explanation for the strength enhancement. The waste-extraction procedure (toxicity-sulphuric acid and nitric acid method (HJ/T 299-2007)) was used to evaluate metal leaching, indicating the reuse possibility of fly ash blended mortar. For the mortar with the mass ratio of fly ash to binder of 0.5%, the carcinogenic risks (CR) and non-carcinogenic hazard quotient (HQ) in sensitive scenario for blended mortar utilization were 9.66 × 10^-7 and 0.06, respectively; these results were both lower than the threshold values, showing an acceptable health risk. The CR (9.89 × 10^-5) and HQ (3.89) of the non-sensitive scenario for fly ash treatment exceeded the acceptable threshold values, indicating health risks to onsite workers. The main contributor to the carcinogenic and non-carcinogenic risk is Cr and Cd, respectively. The CR and HQ from inhalation was the main route of heavy metal exposure.     

铁磁流体对煤粒瓦斯解吸性能影响实验研究*

为探究铁磁流体对煤体瓦斯解吸性能的影响，采用水浴恒温吸附解吸系统，开展0.44，0.65，1.14 MPa 3组不同平衡压力下加铁磁流体前后的瓦斯解吸对比实验，根据Langmuir方程经验公式计算瓦斯极限解吸量和初始扩散系数，分析铁磁流体对煤体瓦斯解吸影响的机理。结果表明:在3组不同平衡压力下加入铁磁流体后瓦斯极限解吸量由2.5，10，20 mL/g降低为2.22，3.33，10 mL/g，降低11.2%，66.7%，50%；初始扩散系数由0.997 1，1.629 9，3.888 3 μm2·s降低为0.685 5，0.997 1，2.933 5 μm2·s，降低31.25%，38.82%，24.56%。在铁磁流体的作用下，煤体瓦斯解吸性能得到大幅降低。     

以Hartwick准则破解“资源的诅咒”

一些资源禀赋较高的国家或地区,一直以来经济社会发展未充分享受自然资源带来的红利,甚至陷入贫困和动荡,这一现象被称作"资源的诅咒";在我国,也有不少资源型城市在发展过程中由于资源的耗竭而陷入困境。经济学家Hartwick对资源枯竭区域发展进行了深入研究,并提出"Hartwick准则"对这一类区域的发展进行了理论指导。本文对Hartwick准则进行简要介绍,以这一准则在非洲国家博茨瓦纳的钻石开发中的应用进行分析,并依据理论和经验,对我国一些资源型区域的发展提出建议。     

基于RFPA2D复合局部挠曲岩体数值模拟

为研究复合局部挠曲岩体强度特征以及破坏规律，采用岩石真实破裂软件RFPA^2D，对水平层面挠曲30°，45°，60°，75°的复合岩体进行单轴压缩试验模拟。模拟结果表明:挠曲角为30°，45°，60°，75°的复合岩体破坏面几乎与挠曲段夹层重合，其挠曲端部均产生了垂直于挠曲段夹层的裂纹；复合单斜岩体与复合挠曲岩体破坏面的形成因素大致相同，夹层强度是2种岩体失稳的主要因素；复合挠曲岩体单轴抗压强度随挠曲角增大同样呈“U”型变化，与单斜岩体变化趋势一致；当水平层状岩体发生挠曲后，其单轴抗压强度减小，当挠曲角为60°时，强度降低25.19%，当挠曲角为75°时，强度降低0.17%。；随着均质系数m的增大，复合挠曲岩体单轴抗压强度以及轴向应变均出现逐渐递增的趋势，且不同m值，其岩体裂隙扩展方式具有明显差别。     

基于社会技术系统的复工企业疫情防控风险路径研究*

为对复工企业疫情防控中的风险致因因素进行分析，探寻复工企业疫情防控的风险路径，基于社会技术系统理论，建立宏观工效学模型，通过查阅并分析国家、地方政府、企业文件以及相关文献，从人员、技术、组织管理、内部环境及外部环境5个子系统出发，识别出16个复工企业疫情失控致因因素；运用社会网络分析（SNA）构建复工企业疫情防控关系网络，对各因素节点中心度进行计算，分析各节点在网络中的位置及影响程度；采用贝叶斯网络（BN）进行参数学习和推理学习，找出复工企业疫情失控的最大致因链。结果表明:复工企业疫情失控关系网络中，存在政府监督管理不力→防疫物资筹备不足→日常监管不到位，政府监督管理不力→ 防疫宣传、培训缺失→员工防疫知识欠缺，政府监督管理不力→防疫宣传、培训缺失→日常监管不到位3条最长风险路径。研究结果可帮助复工企业针对最长风险路径中的因素进行管理，从而有效地为复工企业防疫提供理论支持。     

大气环境监测全过程质量控制研究

我国经济飞快的发展速度,不但丰富了人们的生活内容、方便了人们的生活,而且还在人们生活中产生了一些负面影响,大气污染问题已经引起了国家政府以及我国民众的一致关注,国家还为此制定并颁布了相关的整顿治理措施,在大气环境治理方面,大气监测是重要手段,本文对大气环境监测全过程质量控制问题展开分析研究。     

化肥厂爆炸事故的不安全动作分析

为了分析化肥厂爆炸事故背后的不安全动作。本文选取了2009-2018年间国内外发生的52起典型化肥厂爆炸事故。从发生时间的角度分析事故特性,发现白昼期间的事故发生概率相对较高。同时文章分析了运输卸料、车间操作、特种作业和管理人员4种作业类型的不安全动作,从发生频率和风险等级两个方面评估了不安全动作的综合危险度。结果表明13项不安全动作的综合危险度较高,需要重点预控。     

Research based on double coverage rate and reliability of gas detector layout optimization

The gas detector layout should be highly attuned to combustible gas leakage and attain a good reliability in avoiding detector malfunction, which is an important guarantee for the normal production of the chemical industry and other related enterprises. Herein, a gas detector layout optimization method based on double coverage and reliability is proposed. The key gas leakage monitoring area is determined through layout scene field investigation. To improve the detection probability and detection system reliability, the dual coverage target and voting mechanism are set, and the gas detector layout is determined with the ray-casting algorithm according to the coverage target. Combined with FLACS software to simulate a variety of typical leakage conditions under different layout scenarios, the relationship between the leaked gas concentration detected by gas detectors in each layout scheme and time is obtained, and the gas leakage detection probability in each layout scheme, number of detectors that can trigger the alarm, shortest time to trigger the alarm and reliability are comprehensively evaluated. The decision-maker selects the final gas detector layout plan according to the evaluation results and actual site needs. The study shows that the detection probability of each layout scheme set according to the double coverage is high, and multiple detectors can trigger the alarm (up to 100%), which ensures that the alarm can be triggered within 10 s under all applicable conditions. According to the evaluation results, the decision-maker can obtain a layout scheme that not only agrees with the actual site conditions but also attains a high detection probability, short detection time and strong reliability.     

非金属管道微小泄漏动力学数值模拟和试验对比

为了探索非金属输送管道泄漏规律,从数值模拟和试验两个角度,对液体PE管道发生泄漏前后管道内流体与泄漏口的流动状态进行了对比分析,为判定管道泄漏提供了依据。运用FLUENT软件针对PE液体管道泄漏,在不同孔径、不同压力下,构建管道泄漏模型分别进行仿真,分析不同泄漏情景下压力梯度的分布规律。同时在近似相同条件下进行PE管道两点泄漏模拟试验。结果显示:数值模拟与试验结果基本一致,泄漏孔处压力、流速均与管内初始压力成正相关;初始压力和孔径的增大,会导致管内压力下降速度上升,但最终会趋于稳定值。